Civil 3d 2018 Raster Design Object Enabler

Solved: Raster Design Object Enabler For Mac Download
Raster Design Download
Solved: Raster Design Object Enabler For Mac Pro

Create lines and polylines from raster images, and convert raster files into vector drawings. Image transformation functionality Show and analyze geo images in Civil 3D civil engineering software and the AutoCAD Map 3D toolset. The Autodesk® Architectural Desktop 2006 Object Enabler is a freeware application that allows object data created in Autodesk Architectural Desktop 2006 to be accessed outside the Autodesk Architectural Desktop environment.

Using the AutoCAD Raster Design Object Enabler The AutoCAD Raster Design 2011 Object Enabler is a freeware application that you can use to access AutoCAD Raster Design 2011 drawing files. This release allows object data created in AutoCAD Raster Design 2011 to be accessed outside the AutoCAD Raster Design 2011 environment.

For example, if half of your AutoCAD seats are AutoCAD 2011, and the other half are AutoCAD Raster Design 2011, the people using plain AutoCAD 2011 can install the AutoCAD Raster Design Object Enabler. Then when they open drawings that were created with AutoCAD Raster Design, they will be able to view, plot, and do basic image management tasks with the images.

Without the AutoCAD Raster Design Object Enabler installed, standard AutoCAD image types created in Raster Design (TIFF, JFIF-JPEG, GIF, etc.) can be readily used in drawings by other AutoCAD 2011–based applications. The Object Enabler is required to display Raster Design custom images, as listed in the topic. Without the AutoCAD Raster Design Object Enabler installed, another application displays only the frames of these custom images, and then only if proxy graphics are enabled. Installing the AutoCAD Raster Design 2011 Object Enabler on any AutoCAD 2011 product provides support of the AutoCAD Erase, Move, Copy, Scale, Rotate, and Draw Order commands on custom images, as well as grip editing.

Accessing and Installing the AutoCAD Raster Design Object Enabler The AutoCAD Raster Design Object Enabler is available on your AutoCAD Raster Design 2011 product media as well as from the Autodesk website. See the instructions below for installing the Object Enabler from the product media.

In addition, you can also download the most current version from the Autodesk web site at. Installing the AutoCAD Raster Design Object Enabler. Insert the AutoCAD Raster Design 2011 product media into your computer's media drive. In the Installation wizard, click Install Tools and Utilities. On the Select the Products to Install page, select AutoCAD Raster Design 2011 Object Enabler and follow the on-screen instructions. If prompted, restart your computer.

Frequently Asked Questions Questions about Object Enabler installation and usage are addressed in the following topics. Note: You can find the latest information about the Object Enablers at. What is the AutoCAD Raster Design Object Enabler?. The AutoCAD Raster Design 2011 Object Enabler is a utility that gives customers of AutoCAD 2011–based products the ability to view and perform limited editing on AutoCAD Raster Design 2011 objects. With the AutoCAD Raster Design Object Enabler, any user with these AutoCAD 2011–based products can have full compatibility with AutoCAD Raster Design 2011 objects. Can the AutoCAD Raster Design Object Enabler be installed on a version of AutoCAD prior to 2011? The AutoCAD Raster Design Object Enabler 2011 can only be installed on AutoCAD 2011–based products.

Do I have to install the AutoCAD Raster Design Object Enabler in order to view AutoCAD Raster Design drawings in AutoCAD-based applications? The AutoCAD proxy graphic mechanism (starting with AutoCAD R13) allows viewing of AutoCAD Raster Design objects in AutoCAD or other Autodesk products that can read drawing files. Be sure you turn on proxy graphics before you save your drawings in AutoCAD Raster Design.

How is the AutoCAD Raster Design Object Enabler different from proxy graphics?. The AutoCAD Raster Design Object Enabler does not replace the proxy graphics mechanism of interoperability. Proxy graphics remain a valuable 'common denominator' of interoperability across the Autodesk product line.

The AutoCAD Raster Design Object Enabler provides a more robust level of compatibility for AutoCAD users. How do I use the AutoCAD Raster Design Object Enabler?. Once installed, the AutoCAD Raster Design Object Enabler works automatically with your existing AutoCAD configuration. If you open a drawing file containing AutoCAD Raster Design objects, they are 'live' and you can edit them directly using AutoCAD commands.

There are no menus, toolbars, or command-line features. The power of the AutoCAD Raster Design Object Enabler is the ability to use existing and familiar AutoCAD commands on AutoCAD Raster Design objects without the need to learn new functionality. How do I install the AutoCAD Raster Design Object Enabler?. The AutoCAD Raster Design Object Enabler is available on your product media. In addition, you can download the most current version from the Autodesk web site at.

How do I distribute the AutoCAD Raster Design Object Enabler install?. The AutoCAD Raster Design Object Enabler is a freeware application that you can distribute to anyone who wants to view your drawings. However, the AutoCAD Raster Design Object Enabler alone cannot display your drawings. You must have an installed copy of AutoCAD 2011 or an AutoCAD 2011–based product.

How do I verify that the AutoCAD Raster Design Object Enabler is installed properly?. When you install the AutoCAD Raster Design Object Enabler, it is added to the Add/Remove Programs list in the Windows Control Panel. Are there any AutoCAD variables that affect the AutoCAD Raster Design Object Enabler?.

When you are using the AutoCAD Raster Design Object Enabler, it is recommended that you use the Object Detect And Command Invoke option in AutoCAD Options. To select the Object Detect And Command Invoke option.

Enter OPTIONS at the AutoCAD command line to display the AutoCAD Options dialog box. Click the Open And Save tab. Under ObjectARX Applications and Demand Load ObjectARX Apps, select Object Detect And Command Invoke. This option checks for any custom objects that exist in a drawing and loads the parent ARX/DBX application. Note When you want to use the AutoCAD Raster Design Object Enabler to view custom objects, set the Demand Load ObjectARX Apps option to Custom Object Detect (1) or Object Detect and Command Invoke (3).

Has released 2019.2. Note: The Autodesk ® AutoCAD ® 2019.1.2 Update is a prerequisite of the Autodesk ® Civil 3D ® 2019.2 Update and must be applied prior to installing the update. If applying the update through the Autodesk Desktop App all prerequisite updates will automatically be installed. The Autodesk Civil 3D 2019.2 Update includes all of the updates and features in the Autodesk Civil 3D 2019.1 Update. The following enhancements have been included in the Autodesk Civil 3D 2019.2 Update: Transparent Command Enhancements. Transparent commands now accessible using the right-click menu.

New Transparent Commands ribbon tab. Contextual ribbon tab when a transparent command is active.

Profile Toolset Crossings in Profile Views. Add linear crossings in profile. Profile crossing label style UNC Path Support for Civil 3D Projects Data shortcut projects now support using a UNC path.

This eliminates the earlier limitation of using mapped drives to host projects. Sample Line Group Support in Autodesk Vault Autodesk Civil 3D 2019.1 introduced the ability to create a data shortcut to a sample line group. In Autodesk Civil 3D 2019.2, this functionality has been extended to Autodesk Vault. LandXML. Property set support for all Autodesk Civil 3D objects. Existing objects are updated on re-import Rail Platform Edge New standards for Belgium and generic rules based on a single carriage The following issues have been resolved in the Autodesk Civil 3D 2019.2 Update: API. An issue where the SurfaceStyle.GetDisplayStylePlan API call produced an error has been resolved.

Cross Sections. An issue that caused corridor sections and labels to disappear in the section view after syncing a DREF has been resolved. Data Shortcuts. An issue where, in some circumstances, a user may experience a long delay when creating a data shortcut has been resolved. An issue that created an unexpected error when referencing rest sample lines has been resolved.

Drainage Analysis. The Analyze Gravity Network wizard has been updated to use the units that are expected. An issue where the grate and combo inlet design in Hydraflow Express and Storm Sewer produced incorrect dimensions has been resolved.

An issue where the depth and spread were incorrect for grate in sag with a local depression has been resolved. Import/Export. The stability of the Export Autodesk Civil 3D Drawing command has been improved. An issue where some drawing entities are not exported when using the Export Autodesk Civil 3D Drawing command has been resolved. An issue where the Export Autodesk Civil 3D Drawing command does not explode external references despite the Bind, insert and explode command being enabled has been resolved.

Solved: Raster Design Object Enabler For Mac

An issue that caused an unexpected error when opening a drawing that was exported using the Export Autodesk Civil 3D Drawing command has been resolved. When opening a drawing that was exported using the Export Autodesk Civil 3D Drawing command in Autodesk AutoCAD, a proxy state dialog box is no longer generated.

An "Export feature lines as" option has been added to the Export Autodesk Civil 3D Drawing command. An issue where a background mask was displayed as a bowtie after exporting a drawing using the Export Autodesk Civil 3D Drawing command has been resolved. General. An issue where clicking on the more information column header in Event Viewer causes an unexpected error has been resolved. Several updates have been made to correct untranslated dialog box messages and command line warnings.

Interoperability. An issue with the availability of the "Get Location from Survey Point" command in Autodesk Revit 2019.1 has been resolved. Labels.

An issue where deleting a component from a parent label style resulted in the deletion of all components in the child label styles has been resolved. LandXML Import/Export. Stability when importing a LandXML file has been improved. Pipe Networks. When extending a pipe using the arrow grip, the slope of the pipe is now maintained as expected.

An issue was resolved where creating a Pipe Network from a 2D polyline resulted in a sloped pipe due to the Pipe Network start elevation being above the source object elevation. An issue that caused pipe network structures to scale incorrectly when setting Pipe Network Structures style to "Fixed Scale from Part Size" has been resolved. An issue that caused unexpected behavior with null structures listed in the Parts List has been resolved. An issue where a 90 degree fitting was being placed when creating a pressure network from objects regardless of the angle pipe actual orientation has been resolved. Rail. An issue that prevented a platform edge from being used as a corridor target has been resolved.

Referenced Templates. Stability when removing templates from the Attached Referenced Template list has been improved. An issue has been resolved where section label sets with a corridor point style from a referenced template are not included in the drawings label sets. Shared Views. When viewing an object's properties in Autodesk Viewer, lines of text no longer overlap. An issue where properties displayed in Autodesk Viewer were different from the properties in the drawing has been resolved. Shared Views.

The "Create surface from point cloud" command is now available in the point cloud context tab. An issue where the smooth surface command causes an unexpected error has been resolved. Traverse Editor. An issue with the dynamic display of some commands has been resolved. Autodesk Vault.

The performance when viewing projects in Autodesk Vault has been improved. Performance when saving large drawings to Autodesk Vault has been improved. Known Issue. In some cases, a corridor may not update as expected after importing a LandXML file containing an alignment. Has released 2019.1.1 update. The AutoCAD 2019.1.1 Update includes all the updates previously released for AutoCAD 2019.

As part of Autodesk's ongoing efforts to provide the best security possible to their customers, they are proactively applying security updates to their products. The 2019.1.1 update must be installed by October 17th, 2018, in order to maintain access to the following features:. Plant Collaboration Project for the Autodesk AutoCAD Plant 3D toolset;. Autodesk Rendering;. Shared Views AutoCAD updates can be applied to AutoCAD including specialized toolsets installed standalone as well as Autodesk Civil 3D and Autodesk Advance Steel. You can install the AutoCAD update in addition to any applicable updates for your toolsets, products and services listed below.

AutoCAD products and services:. AutoCAD 2019. AutoCAD Architecture 2019 specialized toolset. AutoCAD Electrical 2019 specialized toolset.

AutoCAD Map 3D 2019 specialized toolset. AutoCAD Mechanical 2019 specialized toolset.

AutoCAD MEP 2019 specialized toolset. AutoCAD Plant 3D 2019 specialized toolset. Autodesk Advance Steel 2019. Autodesk Civil 3D 2019 After applying this update, the Product Version in the About box will be listed as P.152.0.0 AutoCAD 2019.1.1. If you use one of the other products above, the Built On version will be listed as P.152.0.0 AutoCAD 2019.1.1.

The following table summarizes the new features and enhancements provided in this Update. Description Drawing Compare Feature Enhancement Drawing Compare has been improved to support objects that were created with the AutoCAD Architecture specialized toolset, such as wall objects. Icon Refresh Feature Enhancement The new and remaining icons on the Ribbon and the Quick Access toolbar have been updated to the new icon style. The Command window now supports the light and dark themes. As a result of the detailed information that we received from customers who used the Customer Error Reporting Utility, we were able to identify and fix several defects with the following results: Display. Occasional crashes stemming from a computer's graphics processing unit (GPU) under some conditions no longer occur.

Import and Export. Occasional crashes when importing DGN files with certain types of objects no longer occur. Occasional crashes when importing the layer state with FILEDIA set to 0 no longer occur.

General. Occasional crashes when panning while multiple drawings are opening no longer occur. Several additional defects have been fixed with the following results: Display. A raster image with non-zero transparency displays correctly within a polygonal or a clipped viewport. The REGEN and REGENALL commands display linetypes correctly in all drawings. The drawing order displays correctly when inserting a block into a drawing template (DWT) file. Dimension.

The DIMORDINATE command displays the correct coordinates in model space when the cursor is moved to a new location. Performance. The performance is improved when panning or zooming drawings containing transparent hatches. The performance is improved when using the Multileader Style Manager within specific drawings. Xref. The properties for external references display correctly in the Details panel of the External References palette.

General. A drawing file can be saved to a folder path that contains some special characters such as a percent sign (%). Line and polyline objects maintain the correct lineweight after running certain commands. An external reference filename path can be stored without converting characters to lowercase. The FILLET command works as expected in special cases that involve splines.

Unicode text in a multiline text object is handled correctly in AutoLISP. Has released the 2019.1 update. Below is a list of enhancements and fixes The following enhancements have been included in the Autodesk Civil 3D 2019.1 Update: Rail Ribbon Tab Railway-specific tools are available on the new Rail ribbon tab.

Rail Subassembly Content New rail-specific subassemblies. All are available from the New Rail tab on the Autodesk Civil 3D Subassemblies tool palette.

To install the New Rail tab, click Rail tab Content panel Subassemblies. Rail Offset Alignment Cant Support. Create offset alignments from a Rail alignment. Calculate cant on the offset alignments. Profile – Floating Tangent by Fixed Grade Create a floating vertical tangent that is defined by a fixed grade. Available on the Profile Layout Tools toolbar.

Best Fit Enhancements. Alignments with non-clothoid spiral types.

Profile Draw Options:. Always above EG.

Allow above and below EG Referencing Sample Lines Across Drawings Data shortcut support for sample line groups. You can create a shortcut to a sample line group, and then create a reference to the full group or a subset of the group. Rehab Report Enhancements New sample rehab report formats that include material leveling area.

Pipe Network Structures with Multiple Connection Points Users can snap a pipe to a pipe connection point on a structure. The pipe will stay connected when moving or rotating the structure.

During layout, pipes will snap to either the structure:. Insertion point. Default connection point. Nearest connection point LandXML Enhancements LandXML Import/Export now support:.

Rail alignments with cant calculations. Surface breaklines (as either feature lines or 3D polylines). Property data on surfaces and breaklines Publishing an Autodesk Civil 3D Surface for Consumption in Revit Publish one or more Autodesk Civil 3D TIN surfaces to Autodesk BIM 360 Document Management so that a Autodesk Revit user can link to it. Best Fit Enhancements. Property set support for Autodesk AutoCAD objects (including solids exported from corridors). Geolocation support in derivative data. The following issues have been resolved in the Autodesk Civil 3D 2019.1 Update: Alignments.

An issue where curves are spirals are not imported as expected from InfraWorks has been resolved. There is now a Rate of Change of Cross Slope (%) value that can be set in the Superelevation Options.

When exporting an alignment containing an arc to IMX format, the arc now imports into InfraWorks as expected. API. Using API to explode COGO points now works as expected. Cross Sections.

The ability to add a sample line to a referenced sample line group has been removed. The ability to edit the geometry of a sample line in a referenced sample line group has been removed. Sample line groups no longer display a broken reference icon when reopening the drawing. When promoting a parent alignment, the associated referenced sample line group will now be promoted as expected.

After deleting a section view, the sampled sources are no longer missing from the Section Display Option tab. After deleting an alignment data shortcut, the associated sample line group data shortcut is now removed. An issue with the display of sampled objects when creating a single section view has been resolved. Data Shortcuts. Performance when setting the working folder to a project with a large number of data shortcuts has been improved. An issue that caused an unexpected notification of an out of date view frame group has been resolved.

An issue that caused Autodesk Civil 3D to close unexpectedly when cutting and pasting an alignment that is a data shortcut has been resolved. An issue that caused and unexpected notification of an out-of-date pipe network has been resolved. An unlocalized string of text displayed in the Manage Referenced Settings dialog box has been resolved. An issue where it was not possible to create references to additional sample lines in a previously referenced sample line group has been resolved.

Pipe Networks and Pressure Networks. An issue where pipes were sized incorrectly when imported from InfraWorks has been resolved. An issue with importing a STM file that resulted in an incorrect sump depth in structures has been resolved. An issue where some pipe network structures display improperly in profile view has been resolved. The centerline of a pipe network is now retained after using the explode command.

An issue that caused Autodesk Civil 3D to close unexpectedly when using the Export to DWG command in some drawings that contained a pipe network has been resolved. Profiles. Additional display options for the display of block references have been added to Profile view. Pipes with flared end sections that are displayed as a boundary now display as expected in profile view. Horizontal geometry labels now display tangent labels as expected.

Reference Template. When referencing a template that contains pipe rules, the rules will no longer automatically be applied to existing pipe networks in the drawing. Reports. The stability of the Export Project Summary report has been improved. Shared View.

An issue that caused an unexpected error when using the shared view command when Autodesk Civil 3D is side by side with Autodesk AutoCAD has been resolved. Surfaces.

When exploding a surface, the surface boundary is now a closed 3D polyline. Autodesk® Vault. An issue that cause a drawing in Autodesk Vault to be renamed when checked in has been resolved. An issue that caused a duplicate profile to be created under an alignment has been resolved. An issue that prevented creating a reference to a corridor in some cases has been resolved. An issue where the Autodesk AutoCAD drawing check-in dialog box is displayed instead of the Autodesk Civil 3D check-in dialog box when using the command from the ribbon has been resolved.

An issue that caused Autodesk Civil 3D to close unexpectedly when starting a new drawing from the Autodesk Vault ribbon has been resolved. Known Issue. There is a known issue where the Publish Surfaces command fails to upload the published surface to BIM 360. This happens when the source surface uses a render material that is external to the source drawing. To resolve this issue, either:. Use a render material that is contained in the source drawing (ByLayer and ByBlock work), or. Add the render material to the source drawing.

The following enhancements have been included in the Autodesk AutoCAD Civil 3D 2018.2 Update: Design Efficiency Updates Profile Layout Direction:. Draw fixed profile tangents and lay out profiles in either a left-to-right or right-to-left direction when using the Fixed Tangent (Two Points) command and the Draw Tangents and Draw Tangents With Curves commands. Previously these commands required using a left-to-right layout direction.

Vertical Curves in Offset Profile Slope Transition Regions:. Vertical curves are now created in slope transition regions for offset profiles. Previously, where vertical curves were present in the parent profile, offset profiles were created with tangent segments in slope transition regions instead of vertical curves.

Solved: Raster Design Object Enabler For Mac Download

Rail Turnouts and Crossings Commands:. Create and edit rail turnouts and crossovers using the Rail Turnouts and Crossings commands. These commands can be found in Toolspace Toolbox AutoCAD Civil 3D 2018 Update 2 Rail Turnouts and Crossings.

Subassemblies:. A variety of PKT-format subassemblies are included in this update, including new subassemblies and subassemblies that were previously included in the AutoCAD Civil 3D 2017 v1 Enhancements release. Details on specific subassemblies that are included can be found in the Help topic. The Use Targets On the Same Side As the Subassembly check box was added to the Set Width Or Offset Target dialog box in the AutoCAD Civil 3D 2018.1 Update. When this check box is selected, the subassembly will use a target that matches the Side parameter specified for the subassembly (if a target on the same side is specified).

For example, if the Side parameter of a subassembly is Right, then a target on the right side of the baseline is used. If multiple targets are on the same side, then the Selection Choice If Multiple Targets Are Found option is applied. Note: When this check box is selected, a target on the other side will not be used unless there are no targets specified on the same side. In that case, the first target in the Selected Entities to Target list will be used. When this check box is cleared, the subassembly can use a specified target on either side. If multiple targets are specified, then the Selection Choice If Multiple Targets Are Found option is applied and will use the nearest or farthest target on either side.

Note: When the Selection Choice If Multiple Targets Are Found option is applied, the distance between the baseline and the target is calculated as a positive value, regardless of the side of the target. Pressure Network Content:. New metric and imperial pressure network content is included in this release. Details on specific parts that are included can be found in the Help topic. Production Efficiency Updates 3D Solid Crossing Appearance Control in Section Views:. Control the appearance of 3D solid crossings that use the style option by modifying the properties of the 3D solid layer.

For example, the color of a 3D solid crossing that uses the option is now controlled by the color of the layer associated with the 3D solid rather than by the projection style associated with the solid. Multi-Select Projection and Crossing Styles in Section Views:.

Control the appearance of crossing and projected objects and labels using Shift-select and Ctrl-select. Previously, projected and crossing object or label styles could be controlled one at a time. Collaboration Efficiency Updates Autodesk Civil Engineering Data Translator:.

Translate AutoCAD® Civil 3D® files to files that can be used in Bentley® GEOPAK® and Bentley®InRoads®, and translate GEOPAK and InRoads files to files that can be used in AutoCAD Civil 3D. These commands can be found in Toolspace Toolbox AutoCAD Civil 3D 2018 Update 2 Autodesk Civil Engineering Data Translator. The following issues have been resolved in the Autodesk AutoCAD Civil 3D 2018.2 Update: Corridors. An issue where the Daylight Bench subassembly failed to find the daylight point at certain slopes has been resolved. An issue that caused the ribbon to display as blank when a corridor section is selected was been resolved.

An issue that caused a corridor to display an inconsistent station range for the same segment in different viewports has been resolved. Cross Sections.

An issue that caused the arrangement of cross sections in legacy drawings to return to a previous location has been resolved. An issue where turning off the visibility of a component in the Projection Styles dialog box also changed the visibility of objects in cross sections has been resolved. An issue where a multiple selection of objects on the Projections and Crossings tab of the Section View Properties dialog box did not allow editing of the properties of the entire selection has been resolved. An issue that prevented a crossing label style from being assigned to a crossing 3D polyline in a section view using the Properties Palette has been resolved. Feature Lines. An issue that caused the elevation of a feature line to change when editing the elevation of another feature line that was snapped to the PI of the first feature line has been resolved. Pipe Networks and Pressure Networks.

An issue that caused the center line of a pipe network to not honor the Bylayer color and linetype properties after a change to a different layer has been resolved. An issue that caused pipes and structures to not preview with expected layer properties has been resolved. An issue that caused descriptions to be missing for fittings or appurtenances has been resolved. Profiles. An issue that caused hatching to display incorrectly after editing a profile has been resolved. An issue in the French version of AutoCAD Civil 3D where a pipe label in a profile view was not displaying a dot arrow head style when set to that style in a dragged state has been resolved.

Reference Templates. An issue where, in some cases, an update to a reference template caused a change to the elevation of a pipe has been resolved. An issue that caused the order of reference templates to change in the Manage Referenced Template Settings dialog box after making a change to a source template has been resolved. Road Rehab Corridors.

The depth value in the Rehab Parameters palette has been updated to display values that match the precision of the corresponding dimension. An issue that caused the milling and leveling report to display incorrect values has been resolved. In the Subassembly Properties dialog box, the link to the Help has been updated. An issue where all the rehab corridors were displayed as highlighted when a single rehab corridor was selected has been resolved. An issue where the Rehab Parameters palette display blank values after using the Undo command to revert a changed value has been resolved. An issue that caused AutoCAD Civil 3D to become unresponsive after issuing multiple Undo commands in Rehab Corridor Editor has been resolved.

Performance when modifying an accepted cross slope in Rehab Manager has been improved. Sites. Stability when using the Move to Site command has been improved. Traverse Editor. The Traverse Editor now supports the use of "." and "/" characters for distance and length.

Autodesk® Vault. An issue where the dialog box for creating an object reference was not displayed when it was expected to has been resolved. General. An issue where some AutoCAD Civil 3D objects were shown on plots despite being on a frozen layer has been resolved.

The Learn page now displays the AutoCAD Learning Tips. The stability of AutoCAD Civil 3D has been improved when opening a drawing. Autodesk has released the latest update for Civil 3D 2018, 2018.1. AutoCAD Civil 3D 2018.1 Update provides a combination of new capabilities, enhancements to existing capabilities, and general maintenance improvements for Autodesk® AutoCAD® Civil 3D® 2018 users.

New capabilities include the rehab corridor for modeling, assessing, and optimizing roadway rehabilitation proposals and the Infrastructure Parts Editor for the assembly and management of pipe network content. Existing functionality including reference templates, section view crossing/projection drafting, and more have been improved to increase drafting efficiency. Update 1 also includes a number of general maintenance improvements that should be installed by all users. I have had a lot of calls on taking forever to open, and there is finally a fix. You will have to follow the directions from.

Once you have followed the instructions, open the problematic drawing. It will still take forever to open. However, once it's opened and saved, the problem goes away. Thank you to Steve Hill at Red Transit Consultants for reminding me to edit this post. Make sure you do this on ALL machines. Otherwise the issue will keep reoccurring. Take a stop over at if you are interested in some awesome add-on tools for Civil 3D, Map 3D, AutoCAD, and much more.

So in case you haven't noticed, pulled Service Pack 1 and recently released Service Pack 1.1. Below are the issues fixed in the new service pack API. The API has been extended to enable match line and view frames.

The.NET API has been extended to enable write access for setting cant on a railway alignment. An API has been added to create a siteless feature line: static NAMESPACEACDB::ObjectId Create(System::String^ featurelineName, NAMESPACEACDB::ObjectId idCreatedFrom);. An API has been added to move a feature line to none site: static void MoveToNoneSite(NAMESPACEACDB::ObjectId featureLineId);.

An issue where a drawing created in AutoCAD Civil 3D 2016 would display station numbers with extra characters when opened in AutoCAD Civil 3D 2017 has been resolved. An issue that caused the superelevation diagrams to display a design check warning with a blank tooltip has been resolved. An issue that caused the Superelevation Tabular Editor to display a rate of change warning with a blank tooltip has been resolved. An error is no longer reported when moving a data-referenced alignment to a different site. An issue has been resolved where a blank meny woould appear when right-clicking on a data-referenced object that had its source drawing renamed. When using the Export to Civil 3D Drawing command, alignments are now exported as polylines as they have been in previous releases of AutoCAD Civil 3D.

Corridors. An issue that prevented use of the command line to input a station range when using the Export Corridor to Solids command has been resolved. An unexpected error is no longer generated when erasing an intersection while the Intersection Offset Parameter dialog box is open. Export to DWG/DGN. An issue that prevented a successful drawing export to Microstation® DGN format has been resolved. An error is no longer generated when exporting from a drawing that has been saved at the root directory of the local disk.

Raster Design Download

An issue has been resolved where the file browse dialog box for selecting a DWS file when exporting to DGN was not displayed. General. An issue has been resolved where grading criteria sets were duplicated when attaching a referenced template.

Running the AUDIT command after moving an overlapping feature line in a site no longer causes errors to be reported. An issue that caused a grading object to not respond to changes in a feature line after a drawing audit has been resolved.

Hydraflow Extensions. An issue has been resolved that caused the inlet grade dimensions to not match between the Hydraflow Storm Sewers extension and the Hydraflow Express extension. When plotting an Inlet Section Table the "Inlet Depth" and "Inlet Spread" column headers have been changed to "Bypass Depth" and "Bypass Spread". An issue has been resolved that caused an error when applying changes after adding an empty column to a custom report in MyReport. The Hydraflow Storm Sewers extension and the Hydraflow Express extension have updated calculations for gutter spread depth of curb inlets in sag. The Hydraflow Storm Sewers Help has been updated so that definitions are consistent with the current behavior. The Bypass Spread depth values in the Hydraflow Express extension now use the same rounding as in Hydraflow Storm Sewers extension.

The Hydraflow Storm Sewers extension and the Hydraflow Express extension have updated calculations for gutter spread depth of curb inlets in sag. Hydrology and Hydraulics. Linetypes that include blocks and text now are displayed correctly when used for catchment boundaries or flow paths. Labels. A feature has been added where a glyph and tooltip are shown when a label component has had its contents and/or format overridden.

An issue has been resolved where the default projection label style that was specified in the ProjectObjectsToMultiSect command settings was not retained when the Project Objects to Multiple Section Views command was run. Pipe Networks and Pressure Networks. An issue that caused unexpected behavior when using grips to edit pressure network pipes in profile view has been resolved. An issue has been resolved where some changes in a pressure network data shortcut were not synchronized to the referenced drawing. An issue has been resolved where edits to the elevation of a pressure network were not retained when the pressure network was data-referenced. An issue has been resolved where pipe network styles were overwritten when synchronized in paper space. Autodesk® Vault.

An issue has been resolved that caused an error where checking in a drawing that has a TIFF XREF that is checked out. Has released Service Pack 1 for 2017. Keep a look out in your Autodesk Desktop App for the download.

The issues addressed in the service pack are listed below API. The API has been extended to enable match line and view frames.

Solved: Raster Design Object Enabler For Mac Pro

An API has been updated to allow a feature line to be moved to none site: static void MoveToSite(NAMESPACEACDB::ObjectId featureLineId, NAMESPACEACDB::ObjectId destinationSiteId); Alignments and Profiles. Use of object snaps has been enabled for profile view lines. An issue where a drawing created in AutoCAD Civil 3D 2016 would display station numbers with extra characters when opened in AutoCAD Civil 3D 2017 has been resolved. An issue that caused the superelevation diagrams to display a design check warning with a blank tooltip has been resolved. An issue that caused the Superelevation Tabular Editor to display a rate of change warning with a blank tooltip has been resolved. An error is no longer reported when moving a data-referenced alignment to a different site. An issue has been resolved where a blank meny woould appear when right-clicking on a data-referenced object that had its source drawing renamed.

When using the Export to Civil 3D Drawing command, alignments are now exported as polylines as they have been in previous releases of AutoCAD Civil 3D. Corridors. An issue that prevented use of the command line to input a station range when using the Export Corridor to Solids command has been resolved.

An unexpected error is no longer generated when erasing an intersection while the Intersection Offset Parameter dialog box is open. Export to DWG/DGN. An issue that prevented a successful drawing export to Microstation® DGN format has been resolved. An error is no longer generated when exporting from a drawing that has been saved at the root directory of the local disk. An issue has been resolved where the file browse dialog box for selecting a DWS file when exporting to DGN was not displayed. General. An issue has been resolved where grading criteria sets were duplicated when attaching a referenced template.

An unexpected error is no longer generated when erasing a profile while the Profile Layout Tools toolbar is open. An issue that prevented the Miscellaneous Utilities in the Toolbox from being run at the command line has been resolved. Grading and Feature Lines. Running the AUDIT command after moving an overlapping feature line in a site no longer causes errors to be reported. An issue that caused a grading object to not respond to changes in a feature line after a drawing audit has been resolved. Hydraflow Extensions.

An issue has been resolved that caused the inlet grade dimensions to not match between the Hydraflow Storm Sewers extension and the Hydraflow Express extension. When plotting an Inlet Section Table the "Inlet Depth" and "Inlet Spread" column headers have been changed to "Bypass Depth" and "Bypass Spread".

An issue has been resolved that caused an error when applying changes after adding an empty column to a custom report in MyReport. The Hydraflow Storm Sewers extension and the Hydraflow Express extension have updated calculations for gutter spread depth of curb inlets in sag. The Hydraflow Storm Sewers Help has been updated so that definitions are consistent with the current behavior.

The Bypass Spread depth values in the Hydraflow Express extension now use the same rounding as in Hydraflow Storm Sewers extension. The Hydraflow Storm Sewers extension and the Hydraflow Express extension have updated calculations for gutter spread depth of curb inlets in sag. Hydrology and Hydraulics. Linetypes that include blocks and text now are displayed correctly when used for catchment boundaries or flow paths.

Labels. A feature has been added where a glyph and tooltip are shown when a label component has had its contents and/or format overridden. An issue has been resolved where the default projection label style that was specified in the ProjectObjectsToMultiSect command settings was not retained when the Project Objects to Multiple Section Views command was run.

Pipe Networks and Pressure Networks. An issue that caused unexpected behavior when using grips to edit pressure network pipes in profile view has been resolved. An issue has been resolved where some changes in a pressure network data shortcut were not synchronized to the referenced drawing. An issue has been resolved where edits to the elevation of a pressure network were not retained when the pressure network was data-referenced. An issue has been resolved where pipe network styles were overwritten when synchronized in paper space. Autodesk® Vault. An issue has been resolved that caused an error where checking in a drawing that has a TIFF XREF that is checked out.

Has released Service Pack 3 for 2016. The following issues have been resolved in Autodesk AutoCAD Civil 3D 2016 Service Pack 3: API. The API has been extended to enable match lines and view frames. Search Search for: Search Follow Blog via Email Enter your email address to follow this blog and receive notifications of new posts by email. Join 420 other followers Categories. Recent Posts. Archives.

Gotta love downtown utilities under the road. RT @: Great evening at the @ Holiday Party! And congrats to @ for being the 2019 Chapter President!! @. Civil 3D 2019.2 Update. @. RT @: This Saturday @ will serve as host as the @ and @ face off in the Champions Contact Info.